Skip to content
Call (951) 466-2371Licensed, bonded & insured · License #585047

Whole-Home Countertop Packages in Temecula, CA

Temecula Custom Countertops supplies and sets whole-home countertop packages in Temecula, CA, Fallbrook and French Valley. The kitchen, each bath, the laundry room and any wet bar or built-in desk are templated in one visit, planned as a set and installed by one crew, so the stone looks chosen together and the disruption happens once.

  • Free in-home measure
  • You approve the seams on the slab
  • Price in writing first

Get a free measure or a bid

About our whole-home packages

A whole-home package covers every stone surface in the house under one plan and one quote. We help you choose the slabs, keep the edges and thickness consistent, and schedule the rooms so they are finished in one run. The result is a house that looks designed instead of assembled over time.

These packages suit full remodels, new builds, flips and families who simply want the job done once. If you would rather stage the work over several years, we can do that too, and we keep records so a later room still matches.

How we work

One Plan, One Crew, Every Room

We measure your house for free, and trade clients can send plans for a written bid.

One measuring visitKitchen, baths and extras are templated together once the cabinets are in
Slabs chosen as a setWe compare stones side by side so the rooms relate to each other
One written scopeA single quote lists every room, so you see the whole price before we order
CA License #585047Licensed, bonded and insured

Why Treating the House as a Set Works

Buying all the stone for a house at once gives you a better result than buying it room by room. The tones are chosen together, the edges match and the thickness stays consistent from the kitchen to the powder room. When counters are added over several years, those details drift, and nobody can fix that afterward.

Quarries and slab lots change. A stone you loved in one year may be a different shade the next, and a colour name does not guarantee a match. Selecting everything in one trip lets us pull slabs that sit comfortably next to each other and reserve them for your job.

  • Coordinated colour and pattern across kitchen, baths and laundry.
  • A consistent edge profile that ties separate rooms together.
  • One template visit and one install schedule instead of several.
  • Fewer deliveries, fewer plumbing disconnects and less dust in the house.

You also see the full picture before you commit. A single quote shows what each room costs, so you can shift money from one place to another before anything is cut.

Rooms and Surfaces a Package Can Include

Most homes have more stone surfaces than the owner first counts. We walk through the house with you and list each one, so nothing gets forgotten and nothing is ordered twice.

Kitchen and island

The perimeter, the island, any peninsula and the backsplash, which usually decide the material for the whole package.

Bathrooms

Primary and guest vanities, a tub deck, a shower curb or bench and the small sills that finish the room.

Laundry and mudroom

Folding counters, utility sink surrounds and drop zones that need a durable, easy-clean surface.

Extras

Wet bars, built-in desks, fireplace hearths, window sills and outdoor kitchen tops where the house has them.

Choosing Stones That Work Together

The stones in a package do not need to match, and they usually should not. A hardworking kitchen is often best in a durable quartz or granite, and a powder room can carry a showpiece such as marble or a boldly veined quartzite. What ties them together is a shared undertone and a shared edge.

We lay the slabs side by side at the supplier, in the same light, because a colour that looks warm in one room can look cold beside another. Whites, creams and greys have undertones that clash when mixed carelessly, and it is easy to see that at the yard.

Edge profile does a lot of unifying work. A simple eased edge repeated from the kitchen to the baths makes different stones feel related. A heavier ogee in one room and a square edge in the next looks accidental.

The house itself guides the choice. Natural light from big windows, the colour of the cabinets and the flooring all change how stone reads. We bring samples to your rooms and look at them there, and we point out the places where a delicate stone will be asked to do too much work.

Running a Whole-House Install

A whole-home install runs in an order that keeps the house livable. The kitchen is the room you miss most, so we plan it to be out of service for the shortest time we can. The baths are done in turn, so at least one stays in use.

Templating happens once the cabinets and vanities are in place throughout the house. When a builder or general contractor is involved, we coordinate with them so every box is set before we measure, because a vanity moved after templating means a remake.

Fabrication then runs as one batch in the shop, where the work is cut wet, edged and polished. That keeps stone dust out of your home and lets us check that the pieces relate to each other before anything leaves.

On install day the crew works room by room. Each room is cleaned and checked before the next starts, so you are never left with the whole house torn up at once. We remove the packaging and walk the house with you at the end.

Quartzite counter with gold and grey veining book-matched so the pattern mirrors across the seam

Staging a Package Over Time

You can build a package in stages without losing the match. Many families cannot do the whole house in one year, and that is a reasonable decision. The trick is recording enough detail that a later phase lines up.

We write down the slab and the lot you chose, the edge profile, the thickness and the finish, and we keep photographs of the installed work. When you come back for a bathroom next year, we know exactly what to match.

We also suggest an order. The kitchen and the primary bath usually go first, since they are used most and shape how the rest of the house is seen. Guest baths, the laundry and extras follow. If you plan to sell, those first two rooms also carry most of the weight with buyers.

One caution. Stone from the same quarry can still differ between lots, so reserving extra material at the start can be worth the cost when you know later phases are coming. We talk about this in the first meeting, before the first slab is ordered.

How Whole-Home Packages Are Priced

A whole-home package is priced as one scope and is usually estimated at roughly $9,000 to $30,000 for a typical house, depending on the stone and the number of rooms. Here is how the pieces tend to fall, as estimates only.

  • Kitchen and island: about $3,500 to $12,000, the largest share of the total.
  • Primary bath vanity and tub deck: about $900 to $3,500.
  • Guest and powder bath vanities: about $400 to $1,500 each.
  • Laundry and mudroom surfaces: about $500 to $2,000.
  • Extras such as sills, hearths and a bar top: priced per piece.

Stone grade, edge detail, cutouts, backsplashes, tear-out and access move these figures. Buying the stone as a group lets us order efficiently and cut waste. The written quote sets the final price after the measure, and it lists every room so you can adjust before we order.

Looking After Stone Throughout the House

Different rooms ask for different care, so we give you a short routine for each material in your package. Quartz and porcelain need little more than soap and water. Granite, quartzite and marble need a sealer, and the water drop test tells you when.

Bathrooms see hard water, toothpaste and hair products, so wipe the vanity dry now and then. Kitchens see oil, citrus and heat, so use trivets and cutting boards. Laundry surfaces mostly need to be kept clear of bleach and strong detergents, which can dull the finish.

If something goes wrong in any room, one call reaches the crew that built the whole set. We will say whether it can be repaired, polished or resealed, and we keep your slab details on file so a repair matches.

White quartz counter run with faint grey veining, a stainless undermount sink and a brass gooseneck faucet

Edges and Finishes

The process

Four Steps for the Whole House

Every slab and every layout is approved by you before the first cut, so the quote and the result agree.

  1. Call or send the form

    List the rooms you want covered. Builders and designers can send plans, schedules and finish selections for a bid.

  2. Choose the stones together

    We compare slabs across rooms, settle the edge and thickness and reserve the stone for your job.

  3. Template and fabricate

    We measure every room once the cabinets are set, then cut and polish the full package in the shop.

  4. Install room by room

    The crew sets each room in turn, cleans as it goes and checks the finished house with you.

Questions

Whole-Home Countertop Packages: Common Questions

Is it cheaper to do every room at once?

It is more efficient. One measure, one shop run and one install week save trips, and we can order stone together. You see one total before you commit.

Does every room need the same stone?

No, and it often should not. A tough kitchen surface and a showpiece in the powder room can work well together if the edge profile and undertones agree.

How long does a whole-house install take?

Typically around a week of install time after the stone is fabricated. Square footage, stairs and parking all stretch or shrink that, and the measure visit gives you a real calendar.

Do we have to move out?

No. Most families stay put. The kitchen goes out of service for as short a window as we can manage, and the baths are done one at a time.

What if we want to do it in phases?

We record the slab, lot, edge, thickness and finish for each room, so a later phase can match. Extra material can be reserved at the start.

Where should a phased project begin?

Begin with the kitchen, then the primary bath. Those rooms get daily use, set the tone for the house and matter most to future buyers.

Can you work with my builder or contractor?

Yes. We coordinate template timing with them so cabinets and vanities are set first, and we can quote from plans for new construction.

How do I get a quote?

Book the free measure. We walk the house, list each surface and send one written quote that shows the cost of every room.

Free measure

Ask us about a whole-home package

Tell us the rooms and we will measure the whole house once and send one written quote.

Call (951) 466-2371

Licensed, bonded & insured · License #585047. Calls only, we do not receive text messages.

Call (951) 466-2371Licensed, bonded & insured · License #585047