Temecula Custom Countertops is a trusted specialist in concrete countertops in Temecula, CA and across Riverside County, specializing in precast kitchen tops, cast-in-place islands and outdoor bar counters. We offer countertop colour, edge and finish choices to match a ranch or farmhouse look.
Get a free measure or a bid
Or call (951) 466-2371. Calls only, we do not receive text messages.
Our team provides measuring, sealer selection and installation, delivering hand-finished surfaces for both residential and commercial projects. Our own crew handles the template, and we lay out the seam layout and cutouts on a drawing you approve before any piece is cast in the shop.
From pouring a precast slab in the shop to setting an integral sink in the finished top, our team handles every detail. Serving Temecula, Rainbow and Fallbrook, we talk through how concrete behaves before you commit.
How we work
Homeowners get a free measure. Wineries, restaurants, offices and builders get a bid from their drawings.
Concrete countertops are made in one of two ways, and the choice shapes the price, the finish and what can go wrong.
The top is poured into a mould in a controlled shop, cured there and carried to your home to be set. Because the work is done off site, we have more control over the mix, the reinforcement and the surface, and your kitchen stays clean while the top is made. The tradeoff is that a precast piece has to be moved through the house, so size and weight limit how long a single piece can be, and long runs need seams.
The top is formed and poured directly on your cabinets. It suits large or awkward tops that would be hard to carry in, and it can be seamless. The tradeoff is that the work happens in your kitchen, with the mess and the risk to the unfinished surface that implies, and cracking from curing is somewhat more likely. For most kitchens we lean toward precast. For a long outdoor bar or an island that cannot pass through a door, cast in place can make more sense. Weight is the practical limit. Concrete is heavy, and a thick precast top needs a crew to carry it and cabinets that are properly built and level underneath. We check that at the measure, and where a base cabinet is too weak we say so before a mould is built, since a strong top on a weak box is the quickest way to a crack.
Concrete is porous. Without protection it drinks oil, wine and lemon juice and holds the mark, so the sealer is not an optional extra. It is the part of the countertop that decides how the surface lives.
Sealers fall into broad families, and each trades protection against character.
Sealing is recurring. Plan to refresh whichever finish you choose, and treat the surface the way you would a good wooden table: wipe spills promptly, use a cutting board, and keep hot pans on a trivet. If you want the lowest possible upkeep, quartz or granite will serve you better, and we will say so.
If you cook a lot, are hard on a counter or entertain with wine, tell us. We choose the sealer to fit the household, and in a working kitchen that often means a tougher film-forming product near the sink and range, with the hand-rubbed look kept for the parts of the top that see less abuse.
Concrete cracks. That is a fact about the material and not a flaw in a particular top, so it is better to understand it before you buy than to be surprised afterwards.
Fine hairline cracks are common, especially on cast-in-place tops, and they come from the way concrete shrinks as it cures and settles. In a properly reinforced top they are usually cosmetic and not structural. Many owners come to see them as part of the look, in the way that patina on a leather chair is part of the look.
If you want a flawless, uniform surface that will never show a line, concrete is the wrong material. If you want a hand-made top with natural variation, it is one of the best.
We also tell you where the top is most likely to show a line: at a sink cutout corner, across a narrow section between two openings, or near a cooktop where temperature swings. Planning radiused corners on cutouts and keeping narrow strips thick reduces that stress before the first pour.
Concrete fits Temecula's ranch and farmhouse houses and the estate properties that sit among the vineyards. It suits an outdoor bar, a patio kitchen or a rustic indoor kitchen where the neighbours' stone would look too polished.
With hot, dry summers and mild winters, outdoor concrete spends a lot of time in the sun. Unlike quartz, concrete has no resin that sunlight breaks down, and pigments can be chosen for colour that holds. Dark tops get hot, so a lighter mix or a covered bar is worth considering where people rest their arms.
Outdoor tops need extra care in a few places.
Hard water leaves mineral film on any top. On concrete, a damp cloth after use keeps it from building up around the faucet.
Because concrete is made to order, it offers things that slabs cannot. Pigment is mixed in while the concrete is made, so the colour runs through the top instead of sitting on the surface. Surface finish ranges from smooth and polished to textured and lightly exposed aggregate.
Edge profiles are formed in the mould, and thick edges are easy to achieve, which gives a substantial, chunky look. Features such as an integral sink, a drainboard with grooves or an embedded trivet can be cast right into the piece.
Every custom feature is drawn before it is made. We template your cabinets, mark the sink, cooktop and faucet positions, and show you the layout, including seam positions on any long run. That drawing is what we cast to, and changes after the pour are not possible, so the approval step matters.
Because concrete is made to order, the template is the foundation of the job. We measure the finished cabinets, note every opening and any wall that is out of square, and the mould is built to those numbers. A bad template cannot be fixed with a trim cut the way a stone slab sometimes can, so we take the measure slowly and return to confirm it before casting.
As a guide from industry ranges, concrete countertop projects are typically estimated at roughly $2,500 to $6,000. Because every top is custom, your number depends on a set of choices more than on a price list.
These figures are estimates and subject to change with the design and the findings at the measure. The written quote sets the final price, and a free measure is where we start.
A concrete top suits people who like a surface that ages. Clean with a mild, pH-neutral cleaner and a soft cloth. Avoid acids and abrasive pads, which strip sealer and dull the finish. Wipe oil, wine and citrus quickly, use a cutting board, and give hot pans a trivet. Plan on re-sealing at intervals suited to your finish, and ask us which one we recommend for the way your household cooks.
The process
No stone is cut until you have seen the slab and signed off on where the seams go.
Tell us the room and the material you have in mind. Businesses and builders send drawings for a bid.
You choose the slab at the supplier, and we mark where each seam and cut will fall for your approval.
We measure on your installed cabinets, then cut, edge and polish the tops in the shop.
The same crew sets the tops, mounts the sink, closes the seams and cleans up before leaving.
Also from our shop
Questions
Fine hairline cracks are common and usually cosmetic in a reinforced top. A wide or growing crack should be looked at, and a call is the quickest way to ask.
Precast gives us more control and keeps the mess out of your kitchen. Cast in place suits large or awkward tops that cannot be carried in.
It can, because it is porous. The sealer decides how much, and different sealers trade stain resistance against a natural look.
Yes. It has no resin for sunlight to break down. Slope the top, seal the edges and cutouts, and choose an outdoor-rated sealer.
Yes. Sinks, drainboards and trivets can be cast into the top, and we show them on the drawing you approve before casting.
Not as low as quartz. It needs periodic resealing and prompt wiping of spills, which many owners accept for the look.
It leaves a mineral film like it does on any surface. A damp cloth after use keeps it from building around the faucet.
Book the free measure. We check the cabinets, discuss precast or cast in place, and follow with a written quote.
A free measure for homeowners, and a written bid from drawings for businesses and builders.
Licensed, bonded & insured · License #585047. Calls only, we do not receive text messages.
